The Cavender family has been doing respectful business in the Southwest for over 65 years. We are happy to bring our ethical standards of doing business to the Internet. If you have any questions in the way we treat our customers or about our business philosophies, feel free to contact your local Audi dealership who may vouch for our credibility. Please note we only have positive feedback and we work hard to keep it that way.  Read more...

RECOMMENDED TOOLS: Proper rated floor jack, support stands, and wheel chocks, Ratcheting Socket Wrench with Metric Sockets- 14, 17mm Open End Wrench 14, 17mm, Safety Glasses.  Read more...

SERVO SAVER ASSEMBLY
Slide the two #7531 saver arms onto the #9158 tube. Orient the servo arm as shown. Slide the #9157 spring and the #9158 (9156*) adjusting nut on the tube. Tighten the nut until it is even with the top. Push the #7531 small flanged bushing into the top of the #9158 (9156*) tube. Push the #7531 large flanged bushing into the bottom of the #9158 (9156*) tube.  Read more...

Building on the spirit of the 1969 Ford Mustang Boss 302 – one of the most sought-after examples of American performance in the world – a select team of Ford engineers, designers and stylists has distilled the groundbreaking GT to its purest form. Every component has been examined. Each system has been strengthened, lightened and refined. The result is the 2012 Mustang Boss 302, a street-legal race car destined to be America’s next performance legend.  Read more...

Please read instructions thoroughly and completely before beginning installation. Following is steps for installation of ReadyLift (Part#66-1080) Torsion Key that can be applied to Dodge Durango 2WD/4WD and Chrysler Aspen 2WD/4WD. Be carefully when installing this part since the installation requires trained mechanic (recommended).

Step 1: Prior to lifting the vehicle it is recommended that you measure the stock height so that you have a base line measurement. Measure fro m
the bottom of the wheel to the lip of the fender, as in Insert A. Position vehicle on a flat surface and lift vehicle by the frame so that the front wheels are off the ground. Use a floor jack and jack stands or a (2) two post lift if available. Next, locate the torsion key at the rear of the torsion bar under the cab of the vehicle. (Insert B)  Read more...

Lighting. Round fog lamps integral with front fascia. Automatic headlamps (ON/OFF) actuates when ambient light is at low levels, includes headlamps-on-with-wipers. Halogen headlamps. High intensity discharge (HID) low-beam headlamps includes automatic headlamp leveling system and halogen high beams. SmartBeam auto-dimming high-beam headlamp control system (packaged in Entry Nav/Commuter Group on Crew and included in CrewLux)

Mirrors. Power, manual foldaway with heating element, body color. Power folding multifunction with memory, heating element, auto-dimming on driver side, supplemental turn signal and blind spot indicator (if equipped), w/chrome mirrors on CrewLux and Citadel (Packaged in leather interior group on R/T)  Read more...