Gas Trucks RC10GT Servo Saver Assembly PDF Instructions Manual
Sponsored Links
SERVO SAVER ASSEMBLY
Slide the two #7531 saver arms onto the #9158 tube. Orient the servo arm as shown. Slide the #9157 spring and the #9158 (9156*) adjusting nut on the tube. Tighten the nut until it is even with the top. Push the #7531 small flanged bushing into the top of the #9158 (9156*) tube. Push the #7531 large flanged bushing into the bottom of the #9158 (9156*) tube.