can result in a FIRE or EXPLOSION. Installing this turbocharger kit will substantially increase the power output of your engine. Before installing this kit, you should perform a compression test to ensure that your engine is in good condition. Consult a Factory Service Manual for the proper compression test procedure and acceptable in-service limits. The valve lash should be properly adjusted. If the valves are not properly seating, or the valve lash is not properly adjusted, the increased temperatures created by the increased power output could accelerate valve seat wear and cause burnt valves. If for any reason your engine has oil pressure that is below the acceptable service limits as specified in the Factory Service Manual, this problem should be corrected before installing this turbocharger kit. (Note: Check kit contents on the following page before starting your installation).  Read more...

Although this turbo system has been designed to use existing emissions controls (including catalytic converter), check local laws regarding aftermarket modification to emission controlled vehicles. Remove the turbocharger kit from its carton and inspect for any obvious physical damage. All kit components are thoroughly inspected and carefully packaged prior to shipment from the factory. If any shipping damage is evident, contact your supplier and request that they process a claim with the shipper involved. Be sure to review the Turbo System Parts List to verify that you have all necessary kit components to proceed. If any components in the parts list are missing, contact Turbonetics, Inc. Customer Service department.  Read more...